################################################
### Need reformat HDD. All data will be lost ###
################################################

### INFO: ###
# Default address (For recovery): http://mycloud/ or http://192.168.0.3
# User/password by default: admin / mycloud (webgui, ssh, telnet from recovery)
# In DSM power control from WebGUI not work. Use SSH commands:
# Power off:
_shutdown -Ph 0 
# Reboot:
_shutdown -r 0 


### STEP 1 ###
# Download Recovery package and follow instruction from package to "Connect via Telnet". From this point - follow THIS instruction (See commands below)
# Or use "Boot recovery from HDD" method if first not work.
# For 2nd method need run TFTP and DHCP servers. PING not needed.

### STEP 2 ###
# Download and put to "tftproot" folder these files:
dsm-kernel.img
dsm-rootfs.tgz
dsm-bootconfig.env

# Connect to WDMC via Telnet and run this commands:
parted /dev/sda
rm 1
rm 2
rm 3
rm 4
rm 5
rm 6
rm 7
rm 8
mkpart primary 0% 2048M
mkpart primary 2048M 3072M
mkpart primary 4828M 100%
mkpart primary 3072M 4624M
mkpart primary 4624M 4724M
mkpart primary 4724M 4824M
mkpart primary 4824M 4826M
mkpart primary 4826M 4828M
q

mkswap /dev/sda2
mkfs.ext3 /dev/sda1
mkfs.ext3 /dev/sda3

mkdir /tmp/hdd1
mkdir /tmp/hdd3
mount /dev/sda1 /tmp/hdd1
mount /dev/sda3 /tmp/hdd3
cd /tmp/hdd3

tftp -g -b 8192 -r dsm-kernel.img 192.168.0.1
tftp -g -b 8192 -r dsm-rootfs.tgz 192.168.0.1
tftp -g -b 8192 -r dsm-bootconfig.env 192.168.0.1

tar xvfz dsm-rootfs.tgz -C /tmp/hdd1
dd if=dsm-kernel.img of=/dev/sda4
dd if=dsm-bootconfig.env of=/dev/sda7
cd /
umount /tmp/hdd1
umount /tmp/hdd3
sync
poweroff

# After that WDMC boots to DSM. All done.